Leica GMX910 Smart Antenna built with flexibility in mind, this monitoring smart antenna is adaptable and upgradable. Monitoring professionals of critical projects can create an antenna that suits their needs. From basic single frequency option to advanced multi-frequency, multi-constellation tracking, the Leica GMX910 Smart Antenna is an all-in-one performer.
Leica GMX910 Smart Antenna equipped with both GNSS antenna and receiver, the Leica GMX910 Smart Antenna has been designed with simplicity in mind. The highest reliability is achieved intuitively and hassle free. Robust and compact, professionals monitoring landslides, suspension bridges or offshore oil and gas platforms can easily set up this smart device and be assured of results under any conditions.
Leica GMX910 Smart Antenna fully integrated in the Leica Geosystems monitoring solution and anticipating ongoing changes in GNSS technology, professionals have an affordable, high quality device for any of their monitoring installations.
Leica GMX910 Smart Antenna Features:
SIMPLE AND ADAPTABLE
- Multiple upgrade options to fit specific needs of any monitoring projects
- Also available as L1 only receiver
- Use i- combinatio- with autonomous energy sources: solar, wind, fuel cell
RELIABLE 24/7
- High quality measurement, eve- i- difficult environments
- Robust housing that is water, heat, cold and vibration resistant (IP67)
PART OF THE MONITORING SOLUTION
- Seamless connectio- with Leica Spider and Leica GeoMoS for remote sensor setup, upgrade, operatio- and GNSS data processing
Leica GMX910 Smart Antenna Included:
- Leica GMX910 Smart Antenna
- Signal tracking
- Antenna
- Cable
You may also be interested in Leica Viva GS10 SmartRover CS15
Leica GMX910 Smart Antenna Specifications:
| GNSS TECHNOLOGY | ||
| Leica Smart Track+ | Very low noise GNSS carrier phase measurements (<0.5mm rms). Industry leading Pulse Aperture Correlator (PAC) multipath mitigation technology for superior quality measurements. Excellent low elevation tracking, fast acquisition time and jamming resistan | |
| Signal tracking | GPS (L12 , L2P(Y), L2C, L5) GLONASS (L1, L2P, L2C) Galileo (E1, E5a, E5b, AltBOC) BeiDou (B1, B2) QZSS (L1, L2C, L5) | |
| Number of channels | 555 | |
| Update rate | 10 Hz | |
| Antenna | Integrated antenna | |
| MEASUREMENT PERFORMANCE AND ACCURACY | ||
| Post processing static mode | Horizontal: 3 mm + 0.5 ppm Vertical: 5 mm + 0.5 ppm | |
| Real-time kinematic | Single baseline (< 30 km) Horizontal: 8 mm + 1 ppm Vertical: 15 mm + 1 ppm | Network RTK Horizontal: 8 mm + 0.5 ppm Vertical: 15 mm + 0.5 ppm |
| Time for initialisation | Cold start: < 40 s / Warm start: < 30 s / Signal reaquisition: < 1 s | |
| Operating times | Designed for continuous operation | |
| CONNECTION AND POWER | ||
| User interface | Status indicator (LED): satellite tracking and power | |
| Port | 8-pin female Lemo-1 connector data and power 4800-230400 baud rate | |
| Cable | RS232; GEV197 cable | |
| Mounting | 5/8” Whitworth | |
| Power consumption | 2.0 W (when all GNSS constellations tracked) Nominal 12 V DC, voltage range 10.5-28 V | |
| TECHNICAL AND ENVIRONMENTAL DATA | ||
| Dimensions / weight | Diameter: 18.6 cm, Height: 7.1 cm / 0.7 kg | |
| Temperature | Operating: -40 °C to +65 °C (-40 °F to +149 °F) Storage: -40 °C to +80 °C (-40 °F to +176 °F) | |
| Humidity | 100%, non-condensing | |
| Proof against water, sand and dust | IP67 (IEC 60529) and MIL-STD-810G – 512.5-I Dust tight Protected against water jets Waterproof to 1 m temporary immersion | |
| Vibration | Withstands strong vibration during operating, compliance with ISO9022-36-05 and MIL-STD-810G – 514.6-Cat.24 | |
| Drop | Withstands 1 m drop onto hard surface | |
Reviews
There are no reviews yet.