Sonatest Sitescan 240 Flaw Detector builds on the strengths of the well proven Sitescan 230 Instrument, updated to provide new features and enhanced performance in a lightweight, rugged, waterproof package.
Sonatest Sitescan 240 Flaw Detector extended gate to gate measurement allows different echoes, of differing amplitude or polarity, to be used as the reference points. Alarms may be used with unrectified signal display.
Sonatest Sitescan 240 Flaw Detector the 0.001″ (0.01mm) resolution includes the option to display trigonometric values for beam path length, surface distance, and depth.
Sonatest Sitescan 240 Flaw Detector analogue proportional outputs allow interfacing to chart recorders, data loggers or other systems.
Sonatest Sitescan 240 Flaw Detector Features:
- Square wave pulser
- Broadband amplifier for high frequency, high damped transducers.
- Narrowband amplifier filters at 1MHz; 2MHz; 5MHz; and 10MHz.
- Choice of Colour Display with reference waveform for defect identification, or High visibility LCD.
- Time Corrected Gain.
- DAC curves.
- AWS Code Evaluation.
- HELP function.
- Storage of set-ups, A-scans and thickness results.
- Video and Analogue outputs.
- RS232 Interface.
- Up to 15hrs operation from Li-ion battery pack (LCD Version)
Sonatest Sitescan 240 Flaw Detector Included:
- Charger
- Rubber Boot
- Carry bag
- User’s guide on CD
You may also be interested in Sonatest D10 Plus Flaw Detector
Sonatest Sitescan 240 Flaw Detector Specifications:
Test Range: 5mm to 10000mm (0.2-400in) at steel velocity. Variable in 1,2,5 sequence, or continuously in 1mm (0.05in) increments. Also from 1 to 5000 (µs).
Velocity: 1000 to 9999m/s continuously variable.
Probe Zero: 0 to 999.999 µs, continuously variable.
Delay: Calibrated delay from 0-10000mm in 0.05mm steps at steel velocity (0-200in. in 0.05in steps).
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20 dB steps. Direct access to gain control at all times.
Test Modes: Pulse echo and transmit/receive.
Pulser: Square wave pulser, 185V peak amplitude Pulse width 40-250ns linked to frequency selection.
P.R.F.: Selectable 35,63,150,250,500 and 1000 Hz Video
Update Rate: 60Hz (NTSC Mode); 50 Hz (PAL Mode).
Rectification: Full wave, positive or negative halfwave and unrectified rf Frequency
Range: 4 Narrow Bands centred at 1MHz, 2MHz, 5MHz, and 10 MHz. Broad Band at 1.5 to 15 MHz (-6dB). System
Linearity: Vertical ±1% Full Screen Height (FSH) Amplifier Accuracy ±0.1dB. Horizontal ± 0.4% Full Screen Width (FSW).
Reject: 50% suppressive reject. LED warning light when selected.
Units: Metric (mm), Inch (in), or Time (µs).
Display: A colour display, active area being 320 x 234 pixels, 102.72 mm wide by 74.76 mm high. The graticule areas is 250 + 5 pixels by 200 pixels, 80.25 + 1.6 by 63.8 mm. The LCD, the active area is 360 x 240 pixels, 96.0 mm wide by 72.00 mm. The graticule area is 250+5 pixels by 200 pixels, 75.0 + 1.5 by 60 mm.
Gate Monitor: Two fully independent gates for echo monitoring and thickness measurement. Start and width adjustable over full range of unit, amplitude variable from 0 to 100% FSH. Bar presentation. Positive or negative triggering for each gate
Reviews
There are no reviews yet.