Sonatest Masterscan D70 Flaw Detector offers the inspector a fully capable and functional set of tools and software for inspection across all applicated.
Sonatest Masterscan D70 Flaw Detector Constructed using impact resistant materials and designed to meet IP67 standards, the D-70 offers excellent water resistance. Sonatest Masterscan D70 Flaw Detector has a color transflective VGA display, providing high visibility in any lighting condition, with the enhanced user interface and a full screen A-Scan display is available at the touch of a button.
Sonatest Masterscan D70 Flaw Detector can be added and new upgrades performed in the working environment, reducing downtime and increasing work flexibility. Sonatest Masterscan D70 Flaw Detector high levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ration are key functions of the Masterscan D-70.
Sonatest Masterscan D70 Flaw Detector Features:
- Configurable on-board software
- Customizable & intuitive menus
- Split DAC / DVG(AVG)
- Angle Measurement Mode
- Dryscan Capability
- Field Upgradeable
- Encoded B-Scan
- A-Scan Fade
- 4GB on-board memory
- USB Interface for PC import / export
Sonatest Masterscan D70 Flaw Detector Included:
- D-70 Digital Flaw Detector
- Battery, Charger, Charger mains cable
- User Guide & Calibration Certificate
- Certificate of Conformance
- Carry Bag
- UTLity & USB Cable
- Display Window Cover
- Ultrasonic Couplant
You may also be interested in Sonatest SiteScan 380M Flaw Detector
Sonatest Masterscan D70 Flaw Detector Specifications:
| Test Range: | 0.04″ – 787″ (0-1mm up to 0-20,000mm) in steel at 5930m/s (19455f/s) |
| Velocity: | 256 – 16,000 m/s continuously variable |
| Probe: | 0 to 1000 μs |
| Delay: | 800″ (0-20,000m) in steel at 5930m/s. |
| Gain: | 0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps. |
| Test Modes: | Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch. |
| Damping: | 50 and 400 ohm damping selectable. |
| Pulser: | 100-450V – ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load. |
| P.R.F: | Adjustable 5Hz to 6kHz. External sync also available. |
| Screen Update Rate: | 60Hz |
| Rectification: | RF, Full wave, +ve half-wave and -ve half-wave |
| Frequency Range: | 8 selectable filter bands.
|
| System Linearity: | Vertical = 0.5% Full Screen Height (FSH). Horizontal +/- 0.2% Trace Full Screen Width (FSW). |
| Reject (Selectable): | Up to 80% Linear reject (removes baseline noise without affecting indication amplitude) Or Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes) LED Warning when active. |
| Units: | Inch (in), Metric (mm) or microseconds |
| Display: | Color Transflective VGA (640 x 480) TFT Display area: 116.16 x 87.2 mm (4.57 x 3.43 in). A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS). Colors: 9 color options with variable brightness. |
| Gate Monitor: | Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS. |
| Zoom: | Expands range and delay to cover the area set by Gate 1 start & width controls. |
| AGC: | Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%. |
Reviews
There are no reviews yet.