Olympus 38DL PLUS Ultrasonic Thickness Gauge is an innovative instrument that signals a new era in ultrasonic thickness gaging. Ideally suited for almost every ultrasonic thickness application, this handheld thickness gage is fully compatible with a full line of dual and single element transducers.
Olympus 38DL PLUS Ultrasonic Thickness Gauge can be used in applications ranging from wall thinning measurements of internally corroded pipes with dual element probes to very precise thickness measurements of thin or multilayer materials with single element transducers.
Olympus 38DL PLUS Ultrasonic Thickness Gauge comes standard with many powerful but easy-to-use measurement features and a host of application-specific software options. Its sealed case is designed to meet IP67 requirements to withstand the rigors of very wet or dusty environments. The color transflective VGA display provides superior readability from bright sunlight to complete darkness. It features a simple, ergonomic keypad that can be operated with the left or right hand for easy access to all functions.
Olympus 38DL PLUS Ultrasonic Thickness Gauge is designed to meet the challenges of demanding applications and built to withstand tough conditions in the field and on the production floor. Whether you work in very wet or dusty conditions, cold or hot climates, or bright or dark areas, Olympus 38DL PLUS Ultrasonic Thickness Gauge can handle any inspection job. Need an instrument tough enough to tolerate shocks, drops, and rough handling? The Olympus 38DL PLUS Ultrasonic Thickness Gauge with its protective rubber boot and designed for IP67 rating is your answer.
Olympus 38DL PLUS Ultrasonic Thickness Gauge Features:
- Dual and single element transducer compatibility
- Wide thickness range: 0.08 mm (0.003 in.) to 635 mm (25 in.) depending on material and transducer selection
- Corrosion thickness gaging with dual element transducers
- THRU-COAT® and Echo-to-Echo measurements on painted and coated surfaces
- Standard resolution of 0.01 mm or 0.001 in. for all transducers
- High Resolution software option of 0.001 mm or 0.0001 in. with single element transducers 2.25 MHz to 30 MHz
- Thickness, Velocity, and time-of-flight measurements
- Differential mode and Reduction Rate mode
- Time-based B-scan mode; 10,000 reviewable readings per scan
- Olympus High Dynamic Gain technology with digital filters
- V-Path Builder for custom V-path compensation
- Designed for EN15317
Olympus 38DL PLUS Ultrasonic Thickness Gauge Included:
- Olympus 38DL Plus Ultrasonic Thickness Gage w/ Options: (BC# 42135-L/T*)
- Olympus Thickness Gauge
- Olympus 221E Steel Gauge
- AA Battery Holder
- Olympus Couplant B Glycerin Bottle
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Wrist Strap For Unit
- User Manual On CD-ROM
- Hard Carrying Case
You may also be interested in Olympus 27MG Ultrasonic Thickness Gauge
Olympus 38DL PLUS Ultrasonic Thickness Gauge Specifications:
| Dual element transducer measurement mode | Time interval from a precision delay after the excitation pulse to the first echo |
| THRU-COAT® measurement | Measurement of true metal and coating thicknesses with a single back-wall echo (with D7906-SM and D7908 transducers) |
| Thru-Paint Echo-to-Echo | Time interval between two successive back-wall echoes to eliminate paint or coating thickness |
| Single element transducer measurement modes | Mode 1: Time interval between the excitation pulse and the first back-wall echo Mode 2: Time interval between the delay line echo and the first back-wall echo (with delay or immersion transducers) Mode 3: Time interval between successive back-wall echoes following the first interface echo after the excitation pulse (with delay line or immersion transducers) |
| Thickness range | 0.080 mm to 635.00 mm (0.003 in. to 25.000 in.) depending on material, transducer surface conditions, temperature, and selected configuration |
| Material velocity range | 0.508 mm/µs to 13.998 mm/µs (0.020 in./µs to 0.551 in./µs) |
| Resolution (selectable) | Low: 0.1 mm (0.01 in.) Standard: 0.01 mm (0.001 in.) |
| Transducer frequency range | Standard: 2.0 MHz to 30 MHz (â??3 dB) |
| General | |
| Operating temperature range | â??10 °C to 50 °C (14 °F to 122 °F) |
| Keypad | Sealed, color-coded keypad with tactile and audible feedback |
| Case | Impact-resistant and water-resistant, gasketed case with sealed connectors. Designed for IP67. |
| Dimensions (W x H x D) | Overall: 125 mm x 211 mm x 46 mm (4.92 in. x 8.31 in. x 1.82 in.) |
| Weight | 0.814 kg (1.80 lb) |
| Power supply | AC/DC adaptor, 24 V; lithium-ion battery 23.760 Wh; or 4 AA auxiliary batteries |
| Battery life, lithium-ion | Operating time: minimum 12.6 h, 14 h typical, 14.7 h maximum Fast charge: 2 h to 3 h |
| Standards | Designed for EN15317 |
| Display | |
| Color transflective VGA display | Liquid crystal display, display area 56.16 mm x 74.88 mm (2.2 in. x 2.95 in.) |
| Rectification | Full wave, RF, half-wave positive, or half-wave negative |
| INPUTS/OUTPUTS | |
| USB | 1.0 client |
| RS-232 | Yes |
| Memory card | Maximum capacity: 2 GB External MicroSD memory card |
| Video output | VGA output standard |
| Internal Data Logger | |
| Data logger | The 38DL PLUS identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage configuration information through the standard RS-232 serial port or USB port. |
| Capacity | 475,000 thickness measurements or 20,000 waveforms with thickness measurements |
| File names, IDs, and comments | 32-character file names and 20-character alphanumeric location codes with four comments per location |
| File structures | Nine standard or custom application-specific file structures |
| Reports | On-gage reporting of summary with statistics, Min./Max. with locations, Min. review, file comparison, and alarm report |
Reviews
There are no reviews yet.